Sadie with Edifis..
--------------------------
  Log In as Jamie.
1. Load Sadie in usual way - chop up, hotspot etc.

2. Route STING 2 to VTR 16 on SDI router
    Route STING B to SADIE 1 on 9 WAY router

 3. Blue Box - SHIFT D to make EDIFIS the master and set SADIE to "Betacam" BV (ON LINE) mode

4. Using transport controls on SADIEcontrol panel go to first clip and sit on clapperboard 
    (You are watching the Edifis EE through VTR 16 and the Sadie timeline is chasing the Edifis)
   Copy and paste all your Sadie clips to here. Highlight first clip and "Snap Hotspot to Current Time"

   On Sadie panel hit "Goto Start of Clip" button and then hit Play to check sync.
   Now hit "Goto End of Clip" button and andthen Play - now can play up to next clapperboard. 
   Highlight next clip and snap hotspot etc.
   Repeat the above until you have finished.
   (Use the "SCRUB" key to toggle between JOG and SHUTTLE etc)


   5. When everthing is all sync you will need to layback sound to Digibeta, SP, Mini DV, VHSs etc and make a new DAT
       Use the ARC in Sadie suite ( set to 16:9 LB ), No T/C in vision.
       Route "VTR 11" on PESA to Mini DV and VHSs.
       Plug T/C from digi into Sadie Suite DAT m/c.
       Set A1234 on Digibeta and A12 on Beta SP m/cs for insert edit.
       On Blue Box SHIFT B to make Digibeta the master and set C to chase ( no offset ) for SP m/c
       ( B will flash to show it is master and C is set to chase
       Enter and IN and an OUT on the Blue Box.
       Hit AUTO, AUTO on the Blue Box and crash Rx on DAT, Mini DV, VHSs etc